Akg C 414 XLS

1512.00 €
995.00 €
Your store

36 rue Littré, Lille
from Monday to Saturday
10h-12h30 & 14h-19h


Phone : 03 20 88 85 85

Close

Availability warning

Pour recevoir un mail dès que ce produit sera disponible,
veuillez saisir votre adresse mail ci-dessous.

3-years warranty (Terms)

30 days to change your mind (Terms)

Best Price Guarantee

ABOUT THE PRODUCT

The Akg C414 xls is a large diaphragm studio microphone.


The C414 XLS offers 9 directional choices to perfectly match any recording environment. It features a three-frequency low-cut filter and a three-stage attenuation circuit. For use on stage or in a fixed installation, its controls can be easily disabled to avoid any operating errors. An LED also helps to identify the shortest clipping situation.
The C414 XLS maintains the sonic character of the legendary C 414 B-ULS, the longest running reference model in the series. Designed to achieve a neutral, linear sound, it is the most universal studio microphone of the past decades.

FEATURES
Nine selectable pickup patterns enable to choose the perfect setting for every application
Lock Mode all controls can be disabled easily for trouble-free use
Peak Hold LED even detects shortest overload peaks
Incredible Dynamic Range of 152 dB
Three switchable different bass cut filters and three pre-attenuation levels
Leading-edge technology and state-of-the-art components ensure shortest signal path and extra protection against moisture
Polar pattern omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight and 4 intermediate settings
Frequency range 20Hz - 20kHz
Sensitivity 20 mV/Pa (-34 dBV) ± 0.5 dB
Max. SPL 200/400/800/1600 Pa = 140/146/152/158 dB (0/-6/-12/-18 dB) for 0.5% THD
Equivalent noise level 6 dB-A (0 dB preattenuation) (IEC 60268-4)
Signal/noise ratio 88 dB
Preattenuation pad 0 dB, -6 dB, -12 dB, -18 dB, switchable
Bass cut filter slope 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Impedance <=200 ohms
Recommended load impedance >= 2,200 ohms
Supply voltage 48 V phantom power to DIN/IEC
Powering approximately 4 mA
Connector 3-pin XLR to IEC
Euroguitar Reference : 431
By continuing browsing, you accept the use of cookies to offer you adapted content. more information.
I got it