Martin by harman Rush Mh 10 Beam Fx
ABOUT THE PRODUCT
The Mh10-Beamfx is a Beam lyre from Martin By Harman.
FEATURES
Physical data
- Dimensions: 275 x 188 x 325 mm
- Weight: 7.5 kg
Dynamic effects
- Color composition, beam: RGBW
- Color composition, ring: RGB, grouped or 24 individual pixels
- Virtual color wheel: 33 colors, virtual rotation effect, random colors (independent ring and beam)
- Pre-programmed effects: FX (macros) on the ring at programmable speed and direction, synchronization and dowels on multiple devices
- Dimming: 0-100%, fast and fine adjustment (ring
and independent beam)
- Electronic shutter: Strobe, pulsations, black and full dry light (independent ring and beam)
- Pan: Continuous rotation or indexing on 540°.
- Tilt: Continuous rotation or indexing by 270°
- Stroboscope: Adjustable 3 - 20 Hz, pulse and random mode
- Electronic dimmer: 0 - 100%, 4 dimming curves
Optics
- Beam source: Osram 60 W RGBW LE RTDUW S2WP
- Ring sources: 24 LED 0.25 W RGB
- Beam Width: 4.4°.
- LED life: 20,000 h (>70% of initial flux)*
*Values obtained under manufacturer's test conditions
Control and programming
- Control options: DMX, RDM, standalone mode, Master/Slave
- DMX channels: 24 or 93
- Autonomous mode options: Musical or autonomous
- Capacity of the autonomous mode: 4 animations
- Addressing and configuration: Backlit LCD control panel
- Pan & Tilt speed: Adjustable by DMX or control menus
- DMX compatibility: USITT DMX512/1990
- RDM compatibility: ANSI/ESTA E.120
Construction
- Color: Black
- Body: Fire-resistant thermoformed plastic
- Protection class: IP 20
Installation
- Mounting point: 1/4 turn base for standard hook
- Placement : Dry places only. Attached to a structure or surface
- Orientation: All
- Minimum distance to illuminated surfaces: 200 mm
- Minimum distance to combustible materials: 100 mm (4 in.)
- Minimum space around vents and ventilations: 100 mm
Connections
- Power supply (input and recopy): Neutrik powerCON TRUE1
- DMX/RDM input/recording: XLR 3 and 5 pin
Electricity
- Mains: 100-240 V nominal, 50/60 Hz
- Power supply: Self-adaptive switching electronics
- Fuse: T 2.0 A
- Typical current and power: 0.49 A, 108W. FP 0.99
Measurements at nominal voltage, all LEDs at full current. Consider a deviation of +/- 10%.
Approvals
- EU Safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
CEM EU: IN 55015; IN 55032; IN 55103-1,-2; IN 61000-3-2,-3; IN 61000-4-2, -4, -5; IN 61547
Thermal data
- Cooling : Forced air (regulated temperature, silent)
- Maximum ambient temperature: 40° C
- Minimum ambient temperature: 0°C
Supplied accessories
- Power cable, 1.5 m (4.9 ft.) 18AWG/0.75mm2 without plug
- Omega base for standard hook
Accessories Accessories
Power supply cables, 16 A, for mains connection
- Power cable, H07RN-F, 2.5 mm2, 14 AWG, Neutrik TRUE1 NAC3FX-W without plug, 1.5 m : P/N 91611797
- Power cable, H07RN-F, 2.5 mm2, 14 AWG, Neutrik TRUE1 NAC3FX-W without plug, 5 m: P/N 91611786
- Power cable, SJOOW, AWG 12, Neutrik TRUE1 NAC3FX-W without plug, 1.5 m : P/N 91610173
- Power cable, SJOOW, AWG 12, Neutrik TRUE1 NAC3FX-W without plug, 5m : P/N 91610174
Copy cables, 16 A, for cascade wiring
- Power cable, H07RN-F, 2.5 mm2, Neutrik TRUE1 to TRUE1, 0.45 m : P/N 91611784
- Power cable, H07RN-F, 2.5 mm2, Neutrik TRUE1 to TRUE1 1.2 m : P/N 91611785
- Power cable, H07RN-F, 2.5 mm2, Neutrik TRUE1 to TRUE1 2.5 m : P/N 91611796
- Power cable, SJOOW, AWG 12, Neutrik TRUE1 to TRUE1, 0.45 m : P/N 91610170
- Power cable, SJOOW, AWG 12, Neutrik TRUE1 to TRUE1, 1.2 m : P/N 91610171
- Power cable, SJOOW, AWG 12, Neutrik TRUE1 to TRUE1, 2.5 m : P/N 91610172
Power connectors for cable mounting
- Neutrik PowerCON TRUE1 NAC3MX-W (male) : P/N 91611788
- Neutrik PowerCON TRUE1 NAC3FX-W (female) : P/N 91611789
Mounting accessories
Jaw collar: P/N 91602005
Hook in G*: P/N 91602003
Quick-trigger* hook: P/N 91602007
Safety sling, CMU 60 kg, black : P/N 91604006
Safety sling, CMU 60 kg, silver plated: P/N 91604007
*Use only for vertical suspensions
Euroguitar Reference : 81839
- Dimensions: 275 x 188 x 325 mm
- Weight: 7.5 kg
Dynamic effects
- Color composition, beam: RGBW
- Color composition, ring: RGB, grouped or 24 individual pixels
- Virtual color wheel: 33 colors, virtual rotation effect, random colors (independent ring and beam)
- Pre-programmed effects: FX (macros) on the ring at programmable speed and direction, synchronization and dowels on multiple devices
- Dimming: 0-100%, fast and fine adjustment (ring
and independent beam)
- Electronic shutter: Strobe, pulsations, black and full dry light (independent ring and beam)
- Pan: Continuous rotation or indexing on 540°.
- Tilt: Continuous rotation or indexing by 270°
- Stroboscope: Adjustable 3 - 20 Hz, pulse and random mode
- Electronic dimmer: 0 - 100%, 4 dimming curves
Optics
- Beam source: Osram 60 W RGBW LE RTDUW S2WP
- Ring sources: 24 LED 0.25 W RGB
- Beam Width: 4.4°.
- LED life: 20,000 h (>70% of initial flux)*
*Values obtained under manufacturer's test conditions
Control and programming
- Control options: DMX, RDM, standalone mode, Master/Slave
- DMX channels: 24 or 93
- Autonomous mode options: Musical or autonomous
- Capacity of the autonomous mode: 4 animations
- Addressing and configuration: Backlit LCD control panel
- Pan & Tilt speed: Adjustable by DMX or control menus
- DMX compatibility: USITT DMX512/1990
- RDM compatibility: ANSI/ESTA E.120
Construction
- Color: Black
- Body: Fire-resistant thermoformed plastic
- Protection class: IP 20
Installation
- Mounting point: 1/4 turn base for standard hook
- Placement : Dry places only. Attached to a structure or surface
- Orientation: All
- Minimum distance to illuminated surfaces: 200 mm
- Minimum distance to combustible materials: 100 mm (4 in.)
- Minimum space around vents and ventilations: 100 mm
Connections
- Power supply (input and recopy): Neutrik powerCON TRUE1
- DMX/RDM input/recording: XLR 3 and 5 pin
Electricity
- Mains: 100-240 V nominal, 50/60 Hz
- Power supply: Self-adaptive switching electronics
- Fuse: T 2.0 A
- Typical current and power: 0.49 A, 108W. FP 0.99
Measurements at nominal voltage, all LEDs at full current. Consider a deviation of +/- 10%.
Approvals
- EU Safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
CEM EU: IN 55015; IN 55032; IN 55103-1,-2; IN 61000-3-2,-3; IN 61000-4-2, -4, -5; IN 61547
Thermal data
- Cooling : Forced air (regulated temperature, silent)
- Maximum ambient temperature: 40° C
- Minimum ambient temperature: 0°C
Supplied accessories
- Power cable, 1.5 m (4.9 ft.) 18AWG/0.75mm2 without plug
- Omega base for standard hook
Accessories Accessories
Power supply cables, 16 A, for mains connection
- Power cable, H07RN-F, 2.5 mm2, 14 AWG, Neutrik TRUE1 NAC3FX-W without plug, 1.5 m : P/N 91611797
- Power cable, H07RN-F, 2.5 mm2, 14 AWG, Neutrik TRUE1 NAC3FX-W without plug, 5 m: P/N 91611786
- Power cable, SJOOW, AWG 12, Neutrik TRUE1 NAC3FX-W without plug, 1.5 m : P/N 91610173
- Power cable, SJOOW, AWG 12, Neutrik TRUE1 NAC3FX-W without plug, 5m : P/N 91610174
Copy cables, 16 A, for cascade wiring
- Power cable, H07RN-F, 2.5 mm2, Neutrik TRUE1 to TRUE1, 0.45 m : P/N 91611784
- Power cable, H07RN-F, 2.5 mm2, Neutrik TRUE1 to TRUE1 1.2 m : P/N 91611785
- Power cable, H07RN-F, 2.5 mm2, Neutrik TRUE1 to TRUE1 2.5 m : P/N 91611796
- Power cable, SJOOW, AWG 12, Neutrik TRUE1 to TRUE1, 0.45 m : P/N 91610170
- Power cable, SJOOW, AWG 12, Neutrik TRUE1 to TRUE1, 1.2 m : P/N 91610171
- Power cable, SJOOW, AWG 12, Neutrik TRUE1 to TRUE1, 2.5 m : P/N 91610172
Power connectors for cable mounting
- Neutrik PowerCON TRUE1 NAC3MX-W (male) : P/N 91611788
- Neutrik PowerCON TRUE1 NAC3FX-W (female) : P/N 91611789
Mounting accessories
Jaw collar: P/N 91602005
Hook in G*: P/N 91602003
Quick-trigger* hook: P/N 91602007
Safety sling, CMU 60 kg, black : P/N 91604006
Safety sling, CMU 60 kg, silver plated: P/N 91604007
*Use only for vertical suspensions
Euroguitar Reference : 81839
YOU WILL LIKE ALSO
