Mxr Mini Iso-Brick Power Supply M239

130.00 €
Your store

36 rue Littré, Lille
from Monday to Saturday
10h-12h30 & 14h-19h


Phone : 03 20 88 85 85

Close

Availability warning

Pour recevoir un mail dès que ce produit sera disponible,
veuillez saisir votre adresse mail ci-dessous.

Fast delivery

3-years warranty (Terms)

30 days to change your mind (Terms)

Best Price Guarantee

ABOUT THE PRODUCT

The MXR Mini Iso-Brick Power Supply M239 supplies quiet, noise-free DC power to wide range of pedal types while taking up less space than a candy bar. Whether you need a space-saving solution for your downsized travel board or you just need to power a small, carefully curated selection of tried-and-true staples, this little box has what you need.

First, let’s talk outputs. The Mini Iso-Brick Power Supply has five, and each is fully isolated to eliminate obnoxious, gig-ending ground loop noise. Four of the outputs supply 9 volts of power at 300mA, while a fifth can be set to provide either 9 volts or 18 volts at 800mA depending on your needs. With a generous amount of current on tap and the ability to handle both negative and positive grounds, these outputs will accommodate almost any pedal, analog or digital.

And don’t let the five outputs restrict you—if you need to add an extra pedal, the Mini Iso-Brick Power Supply has you covered. It comes with a splitter cable that can be used to connect two pedals to a single output, provided they require the same voltage and you don’t exceed the output’s current rating. You can do this with all of the outputs simultaneously—just purchase the extra cables to do so.

Finally, troubleshooting can be a hassle on dark stages, so the Mini Iso-Brick Power Supply comes equipped with LEDs to let you know that all your connections are solid. Combine that with a lightweight housing that's built like a tank, and you can step on stage with confidence that your pedalboard will stay powered from gig to gig.

FEATURES
- MXR Mini Iso-Brick Power Supply M239
- SKU MXR M239
- 5x outputs regulated and protected power supply for effect pedals
- 4x 9V DC 1.2A (4x 300mA)
- 1x 9/18V DC 0.8A
- Each output is fully isolated to eliminate ground loop noise
- Ability to handle both negative and positive grounds
- Power adaptor and 5 cables included
- Manual : https://vidweb.aws.marketlive.com/jimdunlop_vid/text/content/pdp/manuals/M239.pdf
- Euroguitar Reference : 83735
By continuing browsing, you accept the use of cookies to offer you adapted content. more information.
I got it