Rode M3
ABOUT THE PRODUCT
The Rode M3 is an extremely versatile microphone that is at home in the studio, on location, or wherever a low-noise wide-response cardioid condenser microphone is demanded. An end address condenser microphone, the Rode M3 features a heavy-duty metal body, category leading low self-noise, three stage PAD (O, -10db, -20db), a battery status LED and a High Pass Filter. The Rode M3 also comes complete with windshield and a stand mount, and can be powered via a 9V battery or 24-48V Phantom.
FEATURES
Permanently polarised condenser
Directional pattern: Cardioid
Frequency range: 40Hz ~ 20kHz
Output impedance: 200Ω
Signal noise ratio din iec 651: 73dB SPL (per IEC651)
Equvalent noise: 21dbA SPL (a - weighted per IEC651)
Maximum spl: 142dB (@ 1kHz, 1% THD into 1kΩ load)
Sensitivity: -40dB+/-3dB re 1V/Pa @ 1kHz (6.3mV/Pa @ 94db SPL)
Dynamic range din iec 651: 121dB (per IEC651)
Power supply voltage: 1.6mA (battery)/6.5mA (48V Phantom Power)
Battery life: >200 hours
Output connection: 3 pin XLR
Weight without battery: 390g
Euroguitar Reference : 8098
Directional pattern: Cardioid
Frequency range: 40Hz ~ 20kHz
Output impedance: 200Ω
Signal noise ratio din iec 651: 73dB SPL (per IEC651)
Equvalent noise: 21dbA SPL (a - weighted per IEC651)
Maximum spl: 142dB (@ 1kHz, 1% THD into 1kΩ load)
Sensitivity: -40dB+/-3dB re 1V/Pa @ 1kHz (6.3mV/Pa @ 94db SPL)
Dynamic range din iec 651: 121dB (per IEC651)
Power supply voltage: 1.6mA (battery)/6.5mA (48V Phantom Power)
Battery life: >200 hours
Output connection: 3 pin XLR
Weight without battery: 390g
Euroguitar Reference : 8098
YOU WILL LIKE ALSO
