Audix Micro ADX10FLP
This product is not available anymore
ABOUT THE PRODUCT
The ADX10-FLP is a miniaturized condenser microphone designed to attach to the headstock of a flute. Known for for its clarity, resistance to feedback and ease of operation, the ADX10-FLP has the ability to accurately capture and reproduce the nuances of the flute.
FEATURES
Flute miniature microphone
Transducer type pre-polarized condenser
Frequency response 50Hz - 18kHz
Polar pattern cardioid
Output impedance 800 ohms balanced
Open circuit sensitivity 5.7mV / Pa
Equivalent noise level 25dB (A weighted)
Signal to noise ratio 69dB
Power requirements 9 - 52 volts phantom
Maximum SPL > 120dB
Cable/connector shielded 3" terminating to a miniature 3 pin female XLR connector
Polarity positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Housing / Finish Brass / black e-coat
Weight 4oz (110g)
Euroguitar Reference : 36248
Transducer type pre-polarized condenser
Frequency response 50Hz - 18kHz
Polar pattern cardioid
Output impedance 800 ohms balanced
Open circuit sensitivity 5.7mV / Pa
Equivalent noise level 25dB (A weighted)
Signal to noise ratio 69dB
Power requirements 9 - 52 volts phantom
Maximum SPL > 120dB
Cable/connector shielded 3" terminating to a miniature 3 pin female XLR connector
Polarity positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Housing / Finish Brass / black e-coat
Weight 4oz (110g)
Euroguitar Reference : 36248
